More Than Just Motorcycles

CALL: 1300 4 HONDA (1300 44 66 32)

OPEN MON - FRI 8AM - 5:30PM & SAT 8AM - 1PM.

Honda CMX500 Bobber Cruiser

$8,999.00 $8,290.00

SALE
Honda CMX500 Red
Honda CMX 500
Honda CMX 500
Honda CMX 500
Honda CMX 500
dri rider shorty

Honda CMX500 Bobber

INTRODUCTION – Honda CMX500

Honda is pleased to introduce the all new Honda CMX500 bobber, the newest member to our Cruiser category.

The LAMS approved CMX is a progressive new custom bobber that fuses tradition with ground breaking new ideas and perspectives while offering ample scope for owner customization. Offering a fresh take on custom cool, the CMX mixes old- and new-school style and is engaging and fun to ride, with an outlook geared toward firing the imagination of a younger generation of riders.

Simple and raw, our new CMX is an exercise in straightforward, minimalist design where every detail matters. The low, lean silhouette is crowned by an iconic fuel tank, aggressively raked front end and fat tyres on large-diameter wheels, along with a stamped-steel rear fender and narrow frame body, resulting in a stripped form expressing offbeat individuality from every angle. The evocative round headlight sits up high in a die-cast aluminium mount, the speedometer is a compact dial with negative LCD display and blue backlight, and the ignition is housed below the left side of the fuel tank. Everything that can be is blacked out.

Chassis/Suspension Features & Benefits:

• The CMX riding position is relaxed and neutral, with arms gently outstretched and feet dropping straight down to the mid-mounted pegs.
• Good ground clearance allows surprisingly sporty lean angles.
• To support the CMX’s low-slung look, its attractive tubular-steel frame holds the engine in three places and is designed to be as narrow as possible around the rider’s inseam. Trail is set at 110mm with 28° rake.
• The 41mm fork stanchions are set wide at 230mm apart for handling rigidity, comfort and style, and the lower legs are blacked-out.
• Fork angle is 30°, wheelbase is 1488mm wheelbase and seat height is a low 690mm, resulting in balanced, neutral steering.
• Frame body has a narrow shape and includes an innovative rear loop that separates the seat from the stamped-metal rear fender.
• Dunlop tyres (size 130/90-16 front, 150/80-16 rear) are mounted to 16 inch cast-aluminium wheels.
• ABS is standard.
• Iconic peanut-shaped fuel tanks, aggressively raked front ends and fat tyres on large-diameter wheels result in stripped forms that express offbeat individuality from every angle.
• Blacked-out 45mm tubular swingarm with twin conventional, side-mounted shocks that feature two-step preload adjusters.
• Evocative round headlight sits up high in a die-cast aluminium mount.
• Speedometer is a compact dial with negative LCD display and blue backlight.
• Ignition is housed below the left side of the fuel tank.

Engine/Drivetrain:

• The Honda CMX500 is powered by a 471cc, eight-valve, liquid-cooled parallel twin with strong bottom-end torque and a smooth, linear power delivery.
• The cylinder head uses roller rocker arms; shim-type valve adjustment allows them to be light, for lower valve-spring load and reduced friction.
• The CMX has a silent (SV Chain) cam chain, with the surface of its pins treated with Vanadium to reduce friction through its increased protection against dust.
• The engine has reduced friction through the addition of striations on the piston skirt (a finish that increases surface area, introducing gaps in which oil can flow for better lubrication). An AB 1 salt bath process, used after isonite nitriding, forms a protective oxidization membrane.
• CMX crankshaft pins are phased at 180°, and a primary couple-balancer sits behind the cylinders, close to the bike’s centre of gravity. The primary and balancer gears use scissor gears, reducing noise. The crank counterweight is specifically shaped for couple-balance and its light weight allows the engine to spin freely, with reduced inertia.
• The crankcase uses centrifugally cast thin-walled sleeves. Their internal design reduces the “pumping” losses that can occur with a 180° phased firing order. A deep oil sump holds 3.2 litres.

NOTE: Photos for illustration only, overseas model shown and may include accessories not found on Australian Honda CMX500 models

Engine Type

471cc liquid-cooled parallel-twin four-stroke

Bore x Stroke (mm)

67.0 x 66.8

Compression Ratio

10.7:1

Carburation

PGM-FI; 34mm throttle bodies

Ignition

Computer-controlled digital transistorized w/ electronic advance

Transmission

Manual

Gears

6 speed

Final Drive

Chain; 15T/40T

Wheel Base (mm)

1488

Seat Height (mm)

690

Fuel Tank Capacity (Ltrs)

11.2

Front Tyre (inches)

130/90-16

Rear Tyre (inches)

150/80 – 16

Front Suspension

41mm telescopic fork

Rear Suspension

Twin Shock

Front Brakes

Single 296mm disc w/ hydraulic calipers; ABS

Rear Brakes

Single 240mm disc w/ hydraulic calipers; ABS

kerb Weight (kg)

187.8

Colour (s)

Graphite Black, Matte Armored Silver Metallic, Millennium Red

Video

Accessories




Honda CMX500 Bobber Cruiser

$8,999.00 $8,290.00Ride Away

Honda is pleased to introduce the all new CMX bobber, the newest member to our Cruiser category.

The LAMS approved CMX is a progressive new custom bobber that fuses tradition with ground breaking new ideas and perspectives while offering ample scope for owner customization. Offering a fresh take on custom cool, the CMX mixes old- and new-school style and is engaging and fun to ride, with an outlook geared toward firing the imagination of a younger generation of riders.

Clear selection
  • ADDITIONAL OPTIONS


  • Extended Warranty

    Extended Warranty comes into effect directly after the motorbikes standard warranty.

    Select Star Rated Warranty

    3 Star Options

    Covered Items: Engine, Transmission, Electrical, Cooling System, Suspension, Brakes.

    4 Star Options

    Covered Items: Engine, Transmission, Electrical, Cooling System, Suspension, Brakes, Engine Management System.

    5 Star Options

    Covered Items: Engine, Transmission, Electrical, Cooling System, Suspension, Brakes, Engine Management System, Instrumentation and Electrical Systems, Steering, Fuel Systems.

    3 Star Options

    • 270 $

    4 Star Options

    • 335 $

    5 Star Options

    • 575 $

    To Add and Continue - Press "Close" below

  • Rider Roadside Assist

    Honda Rider Assist is an available option which is a breakdown service only.

    The Standard and Extended Warranty also covers this kind of service as part of the warranty package through Swann Insurance.

    Choose a Level of Assistance

    • 69 $
    • 119 $

    HRCA Membership Number (if applicable)

    To Add and Continue - Press "Close" below.

  • Would You Like an Insurance Quote?

    Insurance?

    Type?

    Off Road Vehicles can Only Apply for Fire and Theft Cover

    *Date of Birth

    *Enter Your Postcode

    Press Close to Continue......

Compare this Product